Driven by a chain drive machine that can be mounted at the top or bottom of the hoistway, the Express Plus travels at up to 32 fpm along aluminum guide rails. Instant safeties prevent the car from falling in the event of a chain failure, while the mechanical limit switches provide over travel protection and slack chain detection. For added safety, interlocks come standard, preventing the doors from opening unless the car is present, and preventing the car from moving until the door is closed.
Call/send stations allow you to send and retrieve the dumbwaiter from any level and feature "car here" and "in-use" indicator lights.
Not sure if the Express Plus will work for you? We offer custom car sizes and configurations, as well as a number of custom finishes and options.
To learn more about the AmeriGlide Express Plus Dumbwaiter, give our dumbwaiter experts a call today.
| Max Travel - Standard | 12' |
| Max Travel - Optional | 51' |
| Car Size - Standard | 20Wx20D or 24Wx24D and 30H or 36H |
| Car Size - Optional | Min car size for side mount rails: 14Wx17D, for rear mount rails, 14Wx14D. Max car size 30Wx30D. |
| Stops - Standard | 2 |
| Stops - Optional | 3 or 4 |
| Weight Capacity - Standard | 200 pounds |
| Weight Capacity - Optional | 300 pounds |
| Stainless Steel Panel Option | Yes |
| Hardwood Door Option | Yes |
| Straight Through Car Option | Yes |
| 90° Car Option | No |
Options Available for the Express Plus Dumbwaiter - Commercial & Residential
- Job Reference
Job Name / PO $0.00
- Car Configuration
Single Opening - Front or Side $0.00
Straight Through $450.00
- Stops
2 Stops $0.00
3 Stops $555.00
4 Stops $1,080.00
- Car Material Selection
Laminate, Veneer, or Food Grade HDPE $0.00
Stainless Steel (Skip down to "Stainless Steel Car Options") $0.00
- Car Material - Laminate, Veneer or HDPE
White Laminate $0.00
Pre-Finished Birch $0.00
Unfinished Birch $0.00
Pre-Finished Maple $0.00
Unfinished Maple $0.00
Pre-Finished Cherry $185.00
Unfinished Cherry $185.00
Pre-Finished Mahogany $185.00
Unfinished Mahogany $185.00
Pre-Finished Oak $185.00
Unfinished Oak $185.00
Food Grade HDPE (High Density Polyethylene) 20"Wx20"Dx30"H Only $585.00
- Car Width & Depth (Clear) - Laminate, Veneer
All Dimensions are Clear $0.00
Capacity: 200 Lbs. for Car up to 24"W and 24"D - 300 Lbs. for Car Over 24"W and/or 24"D $0.00
20"W x 20"D - Standard $0.00
24"W x 24"D - Standard $0.00
30"W x 30"D - Standard - 300 Lb. Capacity $650.00
Custom - Smaller than 20"W x 20D (Enter Dimensions Below) - Additional Lead Time Required $0.00
Custom - Larger than 20"W x 20D (Enter Dimensions Below) - Additional Lead Time Required $125.00
Custom Oversize - Over 24"W and/or Over 24"D (Enter Dimensions Below) - 300 Lb. Capacity - Additional Lead Time Required $650.00
- Stainless Steel Car Size Options
No Stainless Steel Car (make Car Material Selection above) $0.00
304 Grade Stainless Steel, #4 Brushed Finish (Dimensions are Clear) $0.00
Additional Lead Time Required $0.00
Stainless Steel - 20"W x 20"D x 30"H - 200 Lb. Capacity $1,902.00
Stainless Steel - 24"W x 24"D x 30"H - 200 Lb. Capacity $1,902.00
Stainless Steel - 30"W x 30"D x 36"H - 300 Lb. Capacity $2,548.00
Custom Stainless Steel Cars can add up to 6 weeks to build time $0.00
Custom Stainless Steel Car - Up to 24" Wide or Deep (enter dimensions below) $3,748.00
Custom Stainless Steel Car - Over 24" Wide or Deep (enter dimensions below) $4,394.00
- Car Height (Clear) - All Materials
30" High $0.00
36" High $0.00
- Custom Car Width & Depth (Clear) - All Materials
Dimensions are in Whole Inches Only $0.00
Width (min. 14" - max. 30") $0.00
Depth (min. 14" for Rear Rail / min. 17" for Side Rail - max. 30") $0.00
- Call-Send Control Options
"Car Here" Indicators (Included) $0.00
Keylocks (per lock) $93.00
- Options
Automatic In-Car Light $340.00
Float Level Switch $400.00
Machine Room Access Door - Kill Switch $93.00
Gate Switch on Car Gate $340.00
No Door & No Track (Not Recommended - Only for Low Overhead Space Installs) $0.00
- Drive Machine Location
Mount at Top $0.00
Mount at Bottom $0.00
- Travel Measurements
1st Floor Sill Height $0.00
1st Floor to 2nd Floor (inches) $0.00
2nd Floor Sill Height $0.00
2nd Floor to 3rd Floor (inches) $0.00
3rd Floor Sill Height $0.00
3rd Floor to 4th Floor (inches) $0.00
4th Floor Sill Height $0.00
- Total Travel
Up to 12' $0.00
12' To 18' $185.00
19' To 29' $400.00
30' To 40' $555.00
41' To 51' $710.00
- 1st Floor Hoistway Door Location
1st Floor - Front $0.00
1st Floor - Back $0.00
- 2nd Floor Hoistway Door Location
2nd Floor - Front $0.00
2nd Floor - Back $0.00
- 3rd Floor Hoistway Door Location
No 3rd Floor Stop $0.00
3rd Floor - Front $0.00
3rd Floor - Back $0.00
- 4th Floor Hoistway Door Location
No 4th Floor Stop $0.00
4th Floor - Front $0.00
4th Floor - Back $0.00
- Drawings
Drawing Revisions (2 are Standard) Call for Price for Additional $0.00
Job Specific Approval Drawings (Generic Drawings are Supplied at no cost) $250.00
- Permit Fees
Kentucky Permit Fee $87.50
Georgia Permit & Inspection Fees $250.00
 Stainless cab is the bomb! |
May 22, 2019 7:55 PM |
|---|
| GC from ATL from Atlanta, Ga would recommend this to a friend. |
A Little About Myself Commercial GC |
Pros Excellent quality commercial dumbwaiter at a outstanding price. |
Cons Special order stainless cab took 8 weeks to make. |
Service & Delivery Delivered on time and with no damage or missing parts. |
Over the years we have installed 50+ dumbwaiters in the Atlanta area mainly for food service businesses. We had some problems with our last dumbwaiter supplier so decided to try another product. Very happy we did as the cost was way less, quality better, and easier to install. The special order stainless cab is flawless in construction. A win, win, win. |
| 2 of 2 people found this review helpful |
| Very nice. Above our expectations! |
Apr 15, 2019 7:33 AM |
|---|
| Builder from MI would recommend this to a friend. |
A Little About Myself Residential Contractor |
Pros Very easy to install. Works great. Price beats all the rest by far. Made by an elevator company. |
Cons None I have found |
Service & Delivery On time delivery and installation of the elevator. We installed the dumbwaiter. |
Our client wanted an elevator and dumbwaiter. Used local suppliers in the past however we thought we would go shop this hard because of the overall expense. Found Ameriglide online we are glad we did. They manufacture their own elevators and dumbwaiters and sell direct to builders and contractors cutting out the middle man. Quality of the products is great and the price is outstanding. |
| 5 of 5 people found this review helpful |
| Great addition to the house! |
Aug 3, 2018 7:11 PM |
|---|
| Chief from Henderson, NV would recommend this to a friend. |
A Little About Myself Contractor |
Pros Easy installation. Great price! |
Cons None |
Service & Delivery On time, complete, no damage. Did not need CS. |
Took us about 6 hours to install this two stop system. |
| 9 of 9 people found this review helpful |
 Simple |
May 8, 2018 2:01 PM |
|---|
| Jim from North Carolina would recommend this to a friend. |
A Little About Myself |
Pros Easy to install, low price point. |
Cons None |
If you're looking for a dumbwaiter that will work for a two-story home, the Express Plus is exactly what you need. No other dumbwaiter compares in price to the Express Plus. Custom car sizes are available at no extra charge. Installation is quick and easy. Everything you need in a residential dumbwaiter. |
| 33 of 35 people found this review helpful |